For the installation of radiators, professional installation and construction cannot be less. The installation explanation of radiators is divided into three parts, and the installation of products is divided into seven parts, which shows the importance of the installation and construction of radiators. What are the details of radiator installation and construction? What should owners pay attention to when installing radiators? Next, the radiator master will answer.

What details should we pay attention to when installing surface mounted radiators? The radiator company told you

1、 When installing heavy radiators, ground brackets must be installed for support. Aluminum cast radiators in the north are very heavy, while most of the current radiators are steel plate radiators, which are much lighter.

2、 The mixed installation of radiators of various materials may cause operation imbalance. The living room and bedroom are made of good materials, and the kitchen and bathroom space is made of general materials. This practice seems to be light and heavy, saving a little money, but it will cause hidden dangers of heating. Fushan lengnuan clearly stated that installing radiators of different materials in the same system may damage the inner surface of light radiators or damage the protective layer. In addition, due to equipment changes, there are also hidden dangers of operation imbalance.

3、 Heating will increase energy consumption. It is wrong to pack the heating for beauty, because the heat cannot come out after the heating is covered, which not only affects the room temperature, but also increases the water temperature in the radiator and blocks the energy consumption of heating, which not only reduces the efficiency, but also increases the energy consumption. In addition, the cover also brings potential safety hazards to the maintenance and repair of heating.

4、 Improper installation position of radiator is easy to cause losses. Leather sofa or wooden furniture are not suitable for long-term heating, and people are not suitable for long-term being too close to the heater. Therefore, do not install the radiator near the rest area.

5、 When installing the radiator, the aluminum-plastic pipe must be connected with a joint and cannot be bent, otherwise it is easy to cause water leakage of the pipe. Each interface must be wrapped with hemp, and the interface and the aluminum-plastic pipe should be kept at the same horizontal position to avoid the pressure caused by water pressure to the joint, resulting in water leakage at the interface.

6、 After the radiator is installed, the pressure of about 10 kg should be pressed with a press to check whether there is water leakage.

7、 For safe use, people must be kept at home when heating and water testing. During the use of the radiator and after the heating is stopped, check whether various joints are loose and leaking. If the radiator is found to be leaking, notify the installation unit in time for maintenance. It is strictly forbidden for non professionals to dismantle or change the radiator without permission.

Professional radiator installation and construction is the guarantee of comfortable use in winter. When choosing a radiator installation company, the owner can consider the establishment time, construction cases, construction qualifications and other aspects of the company.